UNQWIN Tumbler Mug Heat Press Machine 20OZ,Heat Press Machine for 20OZ Tumblers,DIY Mug Cup Heat Transfer for 20OZ,Cup Heat Press Machine for Skinny Tumblers 110V

Description

Brand: UNQWIN

Color: Green

Features:

• 【With Thermal Protection Function】Temperature range: 0-482 ℉, the time range is 0-999s.Note: It is necessary to put the cup into the cup pad after starting tumbler heat press(Otherwise easy to damage the machine,may also burn yourself), then adjust the temperature to 392 ℉,adjust time to 200s (This is the best setting.)
• 【Pressure adjustment】Pressure adjusting knob can regulate the diameter of the cup (20 oz Tumblers with a Diameter Of 6.8-7.5cm, And Up to 25cm High).Adjusting the pressure affects the size of the gap, there is a gap is normal, during use, you can adjust according to your own needs.You will need to rotate your Tumbler Halfway Around and Run It again which will get better effect.
• 【Upgraded Digital Control Panel】We improved the control board according to many suggestions and test outcomes, it heats up quick, has more precise control in transfering.More clearly to show accurate temperature and heating time for sublimation.Beeping at the end of countdown to remind you the project is done.And you can easily cancel the beeps.
• 【Suitable for DIY enthusiasts & Best Gift Choice】You can easy to heat transfer colorful pictures onto ceramics mugs,cups and glasses.Your design is vivid and beautiful on the bright and smooth ceramic finish.You can make special mugs with this mug heat press for Christmas, Halloween, Thanksgiving or Birthday!DIY decorative mugs have never been easier!
• 【Wide Range of Applications】The Mug press sublimation machine is suitable for 20oz skinny tumblers, straight mugs and tumblers with a diameter of 6.8-7.5cm,and up to 25cm high.Heat press machine cup is suitable for heat transfer cups that are resistant to high temperatures and contain coatings. Great for business and personal use.

Details: Product size: 39.8*26*24.8cm
Weight: 8kg
Main motor power: 900w
Coaster size: 250mm (height) * 210 (circumference) mm
Package weight: 51.2*35.5*32cm
⍣⍣Steps for Usage:
① Clean the mug surface,cut the image as per your design.
② Wrap the mug with the cut image;Make the image in the central and make it symmetrical both sides;Stick the paper with thermal tape.
③ Put the mug in the center of heating mat.
④ Adjust the pressure ball for printing mugs, not too tight, or too loose and close the handle.
⑤ Turn on power  ,adjust the gauge  time about 200S-300S，temp about 356℉-392℉.                                            
⑥ Press Time counting down button ,the machine will sound an alarm automatically when reaching time,turn off power,take out the mug from the heating mat.
⑦ Peal off the paper.
⍣⍣The following are the problems,encountered and the solutions, I hope to help you.
1.Problem:No display after powering up.
Cause:Poor outlet contact, or the fuse is blown.
Solution:Change the power cable and check outlet.Replace fuse with the supplied backup fuse.
2.Problem:Fails to heat up or does not heat up to the temp displayed.
Cause:The heating pad is burnt out.
Solution:Check heating pad connections.Replace the heating pad.
3.Problem:Lack of color, faded image.
Cause:Insufficient temperature and/or press time.
Solution:Adjust the temp and/or increase the heating time.
4.Problem:Darkened, deep color; blurred image.
Cause:Pressed for too long,temperature too high.