$499.00

Connect the power supply; Turn on the switch of “POWER”; Set the vacuum pumping time 1) Press “VACUUM”, the left indicator light (yellow) is lit up; 2) Press “ + ” or “ – ” in the “TIME CONTROL” area to set the vacuum pumping time according to your needs. (For first-time users, please put an empty screen in the middle of the rubber inner cavity, just set 40 seconds for test; if the pointer of the vacuum gauge could reach or pass the middle of the green area, that’s ok. If not, please extend the time and test again until having reached the requirement.) Set the exposure time: 1) Press “EXPOSURE”, the left indicator light (red) is lit up; 2) Press “ + ” or “ – ” in the “TIME CONTROL” area to set the exposure time according to your needs. (Exposure time varies according to the coated photosensitive emulsion. Please just set 300 seconds for test and then reset a suitable time according to the exposure effect.) Once finished the above settings, you could start exposure just as follows: 1) Put the screens coated with photosensitive emulsion and the printed transparency film on the glass. 2) Put the air suction pipe in to the screen; 3) Close the cover and click the “START” button, then it will vacuum pump and expose automatically according to the settings; 4) When the set time is up, it will deflate automatically; Open the cover and exposure is finished. Please just cut off the power supply. Functions of other keys: 1)“RESET” for cancelling the previous settings: if you want to reset the vacuum / exposure time, just press “VACUUM” / “EXPOSURE” and the left indicator light is lit up; Then press “RESET” and the original settings will turn to “ 0 ”; Next, you could set according to your needs. 2)“BACK” for stop working: if you want to stop vacuum pumping or exposure, just press the “BACK” button, that’s ok.

SKU: 681381557811 Category: Tags: ,

Description

Brand: INTBUYING

Color: Blue

Features:

  • There are twelve LED UV light tubes,it can normally be used for about 10,000 hours.
  • The rubber cloth and seal ring adopts Taiwan produces high quality materials; Good stretch elasticity, sealed well.
  • External high speed vacuum pump; Vibration is small; noise is small; vacuum degree is 5Pa;it can work for 24 hours.Equipped with 8mm Tempered glass plate, resistant to friction; the glass is broken, the glass shards are no sharp, to ensure the safety of operator.
  • The timer can set the exposing time, after reach the exposing time, the machine automatically turns off the tubes. The timer have automatic memory function, set in once, whether the number of switch turn on or off, time will save.
  • The exposing area is 20*24in,and it is suitable for exposing different size screen frames within outsize 18*22in.

Details: Connect the power supply; Turn on the switch of “POWER”; Set the vacuum pumping time 1) Press “VACUUM”, the left indicator light (yellow) is lit up; 2) Press “ + ” or “ – ” in the “TIME CONTROL” area to set the vacuum pumping time according to your needs. (For first-time users, please put an empty screen in the middle of the rubber inner cavity, just set 40 seconds for test; if the pointer of the vacuum gauge could reach or pass the middle of the green area, that’s ok. If not, please extend the time and test again until having reached the requirement.) Set the exposure time: 1) Press “EXPOSURE”, the left indicator light (red) is lit up; 2) Press “ + ” or “ – ” in the “TIME CONTROL” area to set the exposure time according to your needs. (Exposure time varies according to the coated photosensitive emulsion. Please just set 300 seconds for test and then reset a suitable time according to the exposure effect.) Once finished the above settings, you could start exposure just as follows: 1) Put the screens coated with photosensitive emulsion and the printed transparency film on the glass. 2) Put the air suction pipe in to the screen; 3) Close the cover and click the “START” button, then it will vacuum pump and expose automatically according to the settings; 4) When the set time is up, it will deflate automatically; Open the cover and exposure is finished. Please just cut off the power supply. Functions of other keys: 1)“RESET” for cancelling the previous settings: if you want to reset the vacuum / exposure time, just press “VACUUM” / “EXPOSURE” and the left indicator light is lit up; Then press “RESET” and the original settings will turn to “ 0 ”; Next, you could set according to your needs. 2)“BACK” for stop working: if you want to stop vacuum pumping or exposure, just press the “BACK” button, that’s ok.

UPC: 681381557811

Reviews

There are no reviews yet.

Be the first to review “INTBUYING Exposure Unit for Screen Printing Vacuum Exposure Machine Plate Making Silk Screening Burning with LED Tubes for 18 x 22inch Frame Exposing Area 20 x 24inch 110V”

INTBUYING Exposure Unit for Screen Printing Vacuum Exposure Machine Plate Making Silk Screening Burning with LED Tubes for 18 x 22inch Frame Exposing Area 20 x 24inch 110V
$499.00