$269.00
Operation Instruction: 1. Laser Tube connection: (Refer to Power supply and laser Device’s connection Diagram) High voltage terminal of Power supply should be connected to the positive pole of CO2 laser device. Current circuit of the power supply shall be connected to negative pole (laser output terminal) of laser device, through an ampere meter or directly. 2. Connection of control signal( Refer to Power supply and control board’s connection Diagram) The control signal shall be reliably connected to control terminal of the power supply , after connecting the DAC output signal and TTL signal of external computer with the power supply, the laser device shall work as expected. If the laser lamp can not work properly, should check the control signal whether correct or not(include check the voltage specification and logic),if use PWM control as power control,make sure f≥20KHz,Amplitude (peak value) ≤5V,Check and protection switch WP connection is correct at same time. 3. Voltage of power input: Power input of the power supply shall be 220VAC/50Hz. If 110VAC required please specify when placing order. 4. Others: A group of protection switches are also reserved for detection of water switch, fan switch,open-enclosure protection and so on. Packing List: 110V Co2 Laser Power Supply x1pcs Includes Flyback Transformer
Description
Brand: Cloudray
Color: 150W
Features:
- Good compatibility: it can be applicable to 150W Laser Tube manufactured by various factories.
- Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
- Easy control: the start and stop of laser can be easily controlled by TTL level.
- The power supply has output open circuit protection, TTL signal indication, water through signal indication and laser output indication. And the Buttonto test output laser manually.
- Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.
Details:
Operation Instruction:
1. Laser Tube connection: (Refer to Power supply and laser Device’s connection Diagram) High voltage terminal of Power supply should be connected to the positive pole of CO2 laser device. Current circuit of the power supply shall be connected to negative pole (laser output terminal) of laser device, through an ampere meter or directly.
2. Connection of control signal( Refer to Power supply and control board’s connection Diagram) The control signal shall be reliably connected to control terminal of the power supply , after connecting the DAC output signal and TTL signal of external computer with the power supply, the laser device shall work as expected. If the laser lamp can not work properly, should check the control signal whether correct or not(include check the voltage specification and logic),if use PWM control as power control,make sure f≥20KHz,Amplitude (peak value) ≤5V,Check and protection switch WP connection is correct at same time.
3. Voltage of power input: Power input of the power supply shall be 220VAC/50Hz. If 110VAC required please specify when placing order.
4. Others: A group of protection switches are also reserved for detection of water switch, fan switch,open-enclosure protection and so on.
Packing List:
110V Co2 Laser Power Supply x1pcs
Includes Flyback Transformer
UPC: 669819730883
Related products
-
Fancierstudio Heat press Digital Heat Press 15 x 15 Sublimation Heat Press Rhinestone Heat Press T-Shirt Heat Press 15×15 B/BLK
$219.99 -
Brother Sewing Machine, GX37, 37 Built-in Stitches, 6 Included Sewing Feet
$145.00 -
TUSY Heat Press Machine 15×15 inch Digital Industrial Sublimation Printer Press Heat Transfer Machine for T Shirts
$219.99 -
Sale!
Cricut Maker 3 – Smart Cutting Machine, 2X Faster & 10X Cutting Force, Matless Cutting with Smart Materials, Cuts 300+ Materials, Bluetooth Connectivity, Compatible with iOS, Android, Windows & Mac
$399.99$378.00
Reviews
There are no reviews yet.